Our products
The plain rack, and where it is still the right one
Bolted iron angle racking, left as steel
- Build
- Bolted iron angle
- Finish
- Plain steel
- Shelves
- Adjustable
The product
What it is, and when it earns its place
This is the original of the two: steel angle, punched along both faces, bolted into a frame and left as it is. It carries stock the way the coated version does and it adjusts the same way.
What it does not carry is a finish. In a dry godown or a back store room where nobody is looking at the rack, that is usually the right trade — the frame is doing the work, and a coat of colour would not add to it.
Where the rack is going to stand on a shop floor, or the room takes damp, ask for the powder coated version instead. It is the same frame with a finish on it.
What we need to quote it
- The space the rack has to fit
- What is going on the shelves, and the tallest item
- How many shelves, and roughly where you want them
- Whether the room takes damp, which usually points to a coated rack instead
- Whether you want it delivered loose or fitted
Where it is used
Where this one usually goes
Godowns and store rooms
Back-of-house storage where the rack has to hold stock rather than match a fit-out.
Workshops and service areas
Benches, frames and shelving that get knocked about and added to as the work changes.
Contractors and site stores
Racking put up on site and moved when the job does, where a finish would not survive the handling anyway.
Options
The decisions you get to make
- 01
Bay size
Height, width and depth cut to the space the rack has to go into.
- 02
Shelf count and spacing
Set from what is going on the shelves, and moved later without stripping the run down.
- 03
Coated instead
If the rack is going somewhere it will be seen, the powder coated version is the same frame with a finish on it.
- 04
Assembled or loose
Built and installed by our team, or delivered in sections for you to bolt up.
How it is supplied
How it reaches you
None of these are fixed catalogue values. Sizes, loading and lead time are settled against your particular job and written onto the quotation.
| Fabrication | Made at our own plant in Kanpur |
|---|---|
| Sizing | Made to order against your measurements |
| Loading | Confirmed per shelf at quotation stage |
| Lead time | Confirmed with your quotation |
| Installation | Delivered and fitted by our team |
Related products
Questions
Iron Angle Racks: common questions
How is this different from the powder coated rack?
Same steel, same bolted build, same adjustable shelves. This one is left uncoated. The coated version holds a colour and takes handling and damp better, which is what the coating is there for.
Will bare steel be a problem in our godown?
In a dry room it rarely is. If the room takes damp, tell us at enquiry stage and we will quote the powder coated version instead — it is the same rack with a finish on it.
Can I add to it later?
Yes. It bolts together, so a bay goes on the end and a shelf moves without stripping the run down or calling a fabricator out.
Also worth seeing
Ordered alongside this, usually
Send us your shop measurements.
A photograph of the wall or the floor, and rough sizes. That is all we need to give you a price.